Ligature Resistant ADA Compliant Grab Bar with V-Closure Strip
Ligature Resistant ADA Compliant Grab Bar with V-Closure StripLigature Resistant ADA Compliant Grab Bar with V-Closure Strip
Share this page

Ligature Resistant ADA Compliant Grab Bar with V-Closure Strip

Model Number:  WH1140 Series
ADA (if mounted at compliant height)
Grab Bars are designed to help meet the needs of the disabled. Grab bars are constructed of 1-1/2" outer diameter type 304 stainless steel tubing with a 14 gage “V” shaped closure strip welded to the bottom of the bar. Closure plate includes intermittent welds along wall plate and small holes opposite grab bar to prevent pooling of water and allow water to drain. Exposed surfaces are polished to a satin finish. Grab bars meet or exceed ANSI, UFAS and ADA requirements for structural strength and have a 1.5 inch minimum space between the grab bar and the mounting surface. Selection of appropriate length, configuration, adequate wall backing and installation dependent on application will determine compliance for accessibility. Consult applicable codes for complete requirements. Compliance is subject to the interpretation and requirements of the local code authority. Grab bars are not recommended for installation in areas of high security.

Regularly Furnished:

This Grab Bars are available in the following lengths -

  • WH1140-24 Grab bar 24 inches (610 mm) length
  • WH1140-30Grab bar 30 inches (762 mm) length
  • WH1140-36Grab bar 36 inches (914 mm) length
  • WH1140-42  Grab bar 42 inches (1,067 mm) length
  • WH1140-48  Grab bar 48 inches (1,219 mm) length

Product Details
  • Material:  Stainless Steel
  • Type of Mount:  Surface Mount
  • Brand:  BestCare®
  • Accessibility:  ADA (if mounted at compliant height)
  • Patent:  Pending
NameDescriptionFile Size
Submittal WH1140 Series Grab Bars (pdf)Ligature Resistant ADA Grab Bars with V-Closure Strip533 KBDownload
NameDescriptionFile Size
Installing WH1140 Grab Bars (pdf)Ligature Resistant Grab Bars WH114059 KBView