15 Gallon Hydrolift Whirlpool

Whitehall offers a wide variety of different sizes and shapes to allow clinicians and therapists to select the products that best meet their users' needs.

Whitehall® whirlpools can function as both whirlpool tubs and a cold tank by removing the turbine assembly and thermometer when cold temperature is required. The turbine assembly and thermometer can be replaced to covert the tank back to warm-water whirlpool use.

Raise your whirlpool with the Hydrolift to access lower and/or upper extremities. In normal operating conditions, the Hydrolift will remain stationary. The Hydrolift and whirlpool may be moved by lowering the whirlpool to the floor and using the whirlpool casters. Model HYL-15-M features a 15 Gallons (56.78 Leters) Extremity Mobile Whirlpool.

Dimensions: Tank Length | 25 inches (635 mm Tank Width | 13 inches (330 mm) Tank Depth | 15 inches (380 mm) Tank Height | 20 inches (510 mm) Tank Capacity | 15 Gallons (56.78 liters) Hydrolift Base Side-to-Side | 21 inches (535 mm) Hydrolift Front-to-Back | 19.5 inches (495 mm) Hydrolift Maximum Height | 53 inches (1,345 mm)

Ideal for use on ther lower leg and arm

Tanks are fabricated of heavy-duty Type 304 stainless steel providing strength and durability. Stainless steel is one of the easiest materials to clean and sanitize. The tank can be a canvas to promote team spirit with Enviro-Glaze® powder coating and provision of team or organizational logo.

EXTREMITY WHIRLPOOLS

Extremity whirlpools are compact, low-gallon whirlpools designed to access the upper and lower extremities. These small whirlpools are intended for use on the foot, ankle, and leg below the knee as well as hand, wrist, and arm.

MOBILE WHIRLPOOLS

• Saves time – No special plumbing connection required
• Use anywhere – Reversing turbines (standard) used to pump used water out of tank and into available sink/drain
• Convenient – Can be easily moved
• Smooth transport – Features heavy-duty locking casters

Turbine Assembly is equipped with Underwriters Laboratory listed 1/2 HP jet pump motor protected with an ABS plastic shell, automatic thermal overload protector, and lifetime-sealed bearings. All parts contacting the water are stainless steel, chrome-plated brass or bronze. Stationary Whirpools are provided with aerator cap. Mobile and Legs Whirlpools are provided with a pump-out hose assembly. Through certification from Nemko, the turbine meets US & Canadian Medical Standards UL 60601-1 & CSA C22.2 No. 601.1 and European Standards IEC 60601-1. Turbines operating with 115 Volts require 6.9 Amps 50 Hertz or 6.2 Amps 60 Hertz. Turbines operating with 230 Volts require 3.5 Amps 50 Hertz or 3.1 Amps 60 Hertz. Cord Type of European, United Kingdom, Australia,India or Israel must be specified for 230 Volts.