Should we keep showing the banner you just clicked on?
Learn More about this warning
For applications requiring ADA compliance and much heavier weight resistance, the Whitehall Bariatric ADA On-Floor Stainless Steel Toilet is constructed from 14 gage 304 stainless steel and supported by both the floor and the wall.
The fixture shall withstand loads up to 2,000 pounds (907.1 kg) with no measurable deflections. It can handle loads upto 5,000 pounds (2267.9 kg) with no permanent damage. The optional -HSBJ seat is rated at 1,200 pounds (544.3 kg).
Optional -EG Enviro-Glaze color finishes are available. Housing includes side access panels to facilitate installation of fixture and hinged seat by others.
END BREAKAGE WITH STAINLESS STEEL Bariatric patients require plumbing fixtures with higher maximum weight capacities than average fixtures found in healthcare facilities. Traditional china toilets support only about 500 lbs., and are more likely to break and cause injury to patients. Traditional porcelain toilets can buckle under immense pressure, shattering and creating sharp and dangerous debris.
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
Toilet design that works utilizing 1.28 gallons (4.85 liters) per flush, thereby reducing water consumption.
Designed for conservation, the toilet flush valve supplied operates with 1.6 gallon (6 liter) per flush.This is the default flush rate for the Toilets on Whitehall's Care-Ware units.
Bedpan lugs are integral to the closet fixture and helps with the positioning the bedpan during cleaning. Bedpan lugs are available for both vitreous china and stainless steel.
Sister company Acorn Vac supplies means to evacuate plumbing waste through a vacuum system. The interface of atmospheric pressure at the toilet bowl and a constant vacuum pressure in the waste piping network provides a highly efficient flush, using only half gallon (1.89 liter) of water. When the push button is activated, the extraction valve opens, allowing atmospheric pressure to push toilet waste into the vacuum piping and toward the vacuum center. A water supply valve is simultaneously activated, allowing the toilet to be rinsed and refilled.
This option provides a 3" O.D. Toilet bowl P-trap in lieu of standard 2-3/8" O.D. P-trap allows for passage of a 2-5/8" diameter. However, it requires a 3.5 GPF flush valve to operate. The waste outlet rough-in location will remain the same as standard.
This option provides a strong and durable seat that can withstand 1,200 lbs. Recommended for the Bariatric Toilets WH2105-BAR or WH2125-A