On-Floor, ADA Compliant Bariatric Stainless Steel Toilet
For applications requiring ADA compliance and much heavier weight resistance, the Whitehall Bariatric ADA On-Floor Stainless Steel Toilet is constructed from 14 gage 304 stainless steel and supported by both the floor and the wall.
Optional -EG Enviro-Glaze color finishes are available. Housing includes side access panels to facilitate installation of fixture and hinged seat by others.
END BREAKAGE WITH STAINLESS STEEL Bariatric patients require plumbing fixtures with higher maximum weight capacities than average fixtures found in healthcare facilities. Traditional china toilets support only about 500 lbs., and are more likely to break and cause injury to patients. Traditional porcelain toilets can buckle under immense pressure, shattering and creating sharp and dangerous debris.
The exterior and bowl interior has a satin finish. The fixture, without the optional -HSBJ hinged seat) shall withstand loads up to 2,000 pounds (907.1 kg) with no measurable deflections. It can handle loads up to 5,000 pounds (2267.9 kg) with no permanent damage. The optional -HSBJ seat is rated at 1,200 pounds (544.3 kg). Optional -EG Enviro-Glaze color finishes are available.
The toilet is designed to meet the needs of bariatric users, water conservation, and ADA compliance.
DISCLAIMERS:This product provides an on-floor bariatric solution capable of withstanding 1,000 lbs (453.59 kg) when combined with an appropriately rated Bariatric Support System.WaterSense recent advancements have allowed toilets to use 1.28 gallons (4.85 liters) per flush or less while still providing equal or superior performance. The WaterSense label is used on toilets that are independently certified to meet rigorous criteria for both performance and efficiency. Only water-saving toilets that complete the certification process can earn the WaterSense label. Must use optional HET valves to meet WaterSense label requirements.Please check with local ADA requirements. ADA compliance is subject to proper installation (including devices such as grab bar) and the interpretations of the local code authority.
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov - Learn More about this warning
Downloads
Resource Type
Title
Description
File Size
Action
Installation Instructions
Install Guide WH2125-A-2-FM Toilet (pdf)
WH2125-A-2-FM (Front Mount, On-Floor, Wall Waste) includes Top & Wall Supply Instructions
Shows specifications for standard configuration. Configuration options may change specifications.
Appropriate for
Bariatric
Accessibility
ADA Compliant
In Stock
Yes
Type of Mount
Wall Mount, Rear Mount Available
Fixture Width
24"
Material
Stainless Steel
Toilet Seat
Optional Bariatric Seats available
Waste Location
Wall, Floor
Valve Type
Top Supply - typically exposed valve, Wall Supply - typically concealed in wall
CSI Divisions
Division 22
Options
Accessories
Image
Model
Description
Downloads
HSBJ
Accessory: Hinged Toilet Seat, BIG JOHN®
Miscellaneous
Image
Model
Description
Downloads
BL
Option: Bedpan Lugs
HET
High Efficiency Toilet (1.28 GPF)
ULF (Toilet)
Ultra Low Toilet Flush Valve (1.6 GPF)
VAC
Flushing Vacuum Plumbing
WO3B
Option: 2-3/8 Inch P-Trap with 3 Inch Plain End Waste Outlet
Models
The toilets shown below are all front-mount toilets though rear-mount toilets are also available for rear-chase applications. The toilet measure 24" (610 mm) wide x 29" (737 mm) front-to-back.
WH2125-A-T-2-FM Front mount fixture; With top spud to accommodate exposed Top Supply flush valve Wall; Wall Waste Outlet
WH2125-A-W-2-FM Front mount fixture; With rear spud to accommodate concealed Wall Supply flush valve; Must specify -LFV (left) or -RFV (right) for wall supply inlet; Wall waste outlet
WH2125-A-T-3-FM Front mount fixture; With top spud to accommodate exposed Top Supply flush valve; Floor Waste Outlet
WH2125-A-W-3-FM Front mount fixture; With rear spud to accommodate concealed Wall Supply flush valve; Must specify -LFV (left) or -RFV (right) for wall supply inlet; Floor waste outlet