Bariatric Tank Toilet

This Tank Toilet is arranged to be installed on a finished wall from the front side. Unit is fabricated from 14-gauge, type 304 stainless steel and is seamless welded construction with exterior surfaces powder coated white (interior of toilet will have a #4 satin finish and will not be powder coated). Bariatric Tank Toilet includes -HSBJ Big John® hinged toilet seat that is rated at 1,200 lbs (544.31 kg)

The toilet shall be fabricated from 14-gauge, type 304 stainless steel. Construction shall be seamless welded, and exterior surfaces are powder-coated white. Housing to include side access panels. The toilet shall be an elongated bowl, and self-draining flushing rim, and include -HSBJ Big John® hinged toilet seat.  The toilet uses a standard residential water inlet and waste outlet. The waste outlet may be specified as either 12" (254 mm) or 10" (254 mm) from the wall. The toilet trap shall have a minimum 3-1/2” (89 mm) seal and shall pass a 2-1/8” (54 mm) diameter ball, and it is fully enclosed. The toilet tank has a polyethylene inner liner and flushes with a conventional Fluid Master® float/flapper mechanism. The flush Button is typically on the left-hand side; to specify the right-hand flush button, specify with -PBR suffix.

END BREAKAGE WITH STAINLESS STEEL. Bariatric patients require plumbing fixtures with higher maximum weight capacities than average fixtures found in healthcare facilities. Traditional vitreous china toilets support only about 500 lbs., and are more likely to break and cause injury to patients. Traditional porcelain toilets can buckle under immense pressure, shattering and creating sharp and dangerous debris.